(View map)
- BrandJet
- Country of manufacturePoland
Max. diameter of a log: 350/450 mm Productivity: 50/80 m3 in change Power: 22/30, 30/37, 37/45 kW
APPOINTMENT:
The machine is developed especially for a rational cut of the round wood by circular saws on a dvukhkantny bar not cut board and the croaker. The machine is ideally suited for processing of a tonkomer, and balance as has two-shaft structure and at the expense of saws of small diameter it turns out minimum spent on drink.
SCHEME OF PROCESSING
-
-
SCOPE:
It is widely applied in pallet production, it is also applied in sawing shops of small productivity. For convenience of transportation the frame of the machine is easily taken to two pieces.
DISTINCTIVE FEATURES:
WORK IN NEGATIVE TEMEPRATURA
Without problems it is possible to operate the machine in not heated rooms and at low temperatures as in the machine there is no pneumatics and hydraulics.
-
Engines work in the direct drive without belt pulleys and maple belts. At the same time above k.p.d. the mechanism of the drive of a saw and enough less powerful engines, than at machines with a belt drive.
-
The system of giving chain - provides with an emphasis in an end face reliable giving of a log. Execution of a chain on giving with teeths is also possible.
-
The powerful wedging knives at the exit from the machine interfere with a clip of saws in the course of work, significantly prolonging a tool resource.
-
For effective removal of sawdust the tape conveyor which allows to work at high speeds of giving is used. Aspiration branch pipes allow to make effectively removal of sawdust without spending time for a machine stop for cleaning of waste
-
The convenient and clear control panel, allows to operate all functions of the machine quickly.
-
On the machine there are stretching ryabukh which help to give a round timber effectively.
-
Kogtevy protection on an entrance to the machine interferes with emission of preparation and ensures safe functioning for the operator. In case of giving of a log diameter it is more maximum automatically the limiter works, stopping giving and interfering with jamming of the machine.
-
-
ADDITIONAL - OPTIONS:
-
The stolekantovatel allows to position the tilter for the machine on giving brevnomaksimalno successfully taking into account curvature and knots. This function allows to increase a useful exit of finished goods.
-
Reception table at the exit from the machine Exhaust rollers, allow to stretch the croaker at the exit from the machine. It is recommended to installation in product lines.
-
-
Technical characteristics: | |||||||||
- |
TD-350 KBA |
TD-450 KBA |
|||||||
Maximum diameter of a log, mm |
350 |
450 |
|||||||
The minimum thickness of the cut bar, mm |
60 |
60 |
|||||||
Minimum length of a log, mm |
1200 |
1200 |
|||||||
Diameter of a saw disk, mm |
500 |
630 |
|||||||
Diameter of a saw shaft, mm |
70 |
70 |
|||||||
The maximum quantity of saws on top to a shaft, piece. |
4 |
4 |
|||||||
The maximum quantity of saws on lower - to a shaft, piece. |
4 |
4 |
|||||||
The maximum length drank, mm |
6200 |
6200 |
|||||||
Speed - giving (stepless), m/min |
0 ÷-10 |
0 ÷-10 |
|||||||
Power of the electric motor of the top shaft, kW |
22 (30) * |
22 (30) * |
|||||||
Power of the electric motor of the lower shaft, kW |
30 (37) * |
30 (37) * |
|||||||
Power of the electric motor of the drive of giving, kW |
2,2 |
2,2 |
|||||||
Dimensions of the machine, mm |
2600х1400х2000 |
2800 x 1550 x 2150 |
|||||||
Weight, kg |
2000 |
2000 |
-
-
Technical characteristics: | |||||||||
- |
TD-350 KBA |
TD-450 KBA |
|||||||
Maximum diameter of a log, mm |
350 |
450 |
|||||||
The minimum thickness of the cut bar, mm |
60 |
60 |
|||||||
Minimum length of a log, mm |
1200 |
1200 |
|||||||
Diameter of a saw disk, mm |
500 |
630 |
|||||||
Diameter of a saw shaft, mm |
70 |
70 |
|||||||
The maximum quantity of saws on top to a shaft, piece. |
4 |
4 |
|||||||
The maximum quantity of saws on lower - to a shaft, piece. |
4 |
4 |
|||||||
The maximum length drank, mm |
6200 |
6200 |
|||||||
Speed - giving (stepless), m/min |
0 ÷-10 |
0 ÷-10 |
|||||||
Power of the electric motor of the top shaft, kW |
22 (30) * |
22 (30) * |
|||||||
Power of the electric motor of the lower shaft, kW |
30 (37) * |
30 (37) * |
|||||||
Power of the electric motor of the drive of giving, kW |
2,2 |
2,2 |
|||||||
Dimensions of the machine, mm |
2600х1400х2000 |
2800 x 1550 x 2150 |
|||||||
Weight, kg |
2000 |
2000 |
-
-
-
-