(View map)
- BrandKazstanex
- Country of manufactureRussia
Knot: 1 knot – the Mill cup: 4 mills on 4 kW the Max. width of a groove: to 220 mm network Tension: 380 V
APPOINTMENT:
It is intended for milling of cross profile grooves of rectangular section in a construction wall glued bar or in a bar from the massif of wood from four parties for one ustan, selection of two grooves by means of one mill "the Scandinavian chalet" is possible.
Production of a groove on all perimeter of a bar for one ustan excludes formation of cracks in house corners at assembly.
On the machine one running cycle a minute is made.
SCOPE:
It is applied to receiving the high-quality pro-thinned-out details from a glued construction bar and a bar from the massif for wooden houses at the enterprises and in shops of wooden housing construction.
SCHEME OF PROCESSING
-
-
THE RECEIVED PRODUCTS
-
-
THE DESIGN FEATURES PROVIDING HIGH PRECISION AND QUALITY OF PROCESSING, CONVENIENCE OF SERVICE OF THE MACHINE AND INCREASE OF PRODUCTIVITY
- The reliable massive bed which passed special processing provides high rigidity and excludes deformation in use, and also durability of operation of the machine without loss of precision parameres.
- Application of linear high-precision guides for movement of milling supports provides high precision and quality of processing.
- The accelerated withdrawal of vertical and horizontal milling supports due to adjustment of a pneumatic actuator of giving provides reduction of an operation cycle and increase in productivity of the machine.
- The console design of landing shaft of milling spindles allows to replace the tool quickly.
- The possibility of adjustment of horizontal and vertical spindles from each other allows to recustomize quickly the machine on the necessary size of the processed grooves and the amount of preparations. The possibility of adjustment of horizontal and vertical spindles from each other allows to recustomize quickly the machine on the necessary size of the processed grooves and the amount of preparations.
- Reliable the clip of preparations on a desktop by means of pneumatic cylinders provides high precision of processing.
- Work of the machine after a clip of preparation is carried out in the automatic mode that provides high efficiency and convenience of work on the machine.
- The convenient control panel provides setup of the machine in the debugging mode.
The machine can be used as independently, and in structure with the tortsovochny and quadrilateral BEAVER machine, forming the line for wooden housing construction:
Operation - - - the Used equipment - - - - a machine Photo
Profiling brusachetyrekhstoronny machines: - BEAVER 623 (320х160 mm) - BEAVER 630 (320х230 mm) - BEAVER 633 (330х250 mm)
-
-
Fair tortsovka brusatortsovochny machines: - CDB - 40K (400х150 mm) - YFC - 30 (680х240 mm)
-
-
Selection chashkichashkozarezny stanki:-WoodTec 4-200 (250х200 mm) - WoodTec 4-250 (250х200 mm) - EuroBlox (230х230 mm)
-
-
OPTIONS:
-
• - Live rolls not driving with the directing ruler and an automatic pneumoemphasis.
-
-
-
Technical characteristics: | |||||||||
Characteristic |
WoodTec 4-200 |
WoodTec 4-250 |
|||||||
The sizes of the processed bars of rectangular section, mm: - - - thickness, the greatest - - - the smallest - - - width, the greatest - - - the smallest |
200 60 250 110 |
250 60 250 110 |
|||||||
The size of the processed bars of square section, mm: - - - the greatest - - - the smallest |
200 x 200 110 x 110 |
250 x 250 110 x 110 |
|||||||
Quantity of vertical milling heads, piece. |
2 |
2 |
|||||||
Quantity of horizontal milling heads, piece. |
2 |
2 |
|||||||
Power of the drive of each milling head, kW |
4 |
4 |
|||||||
Frequency of rotation of mills, rpm |
4130 |
4130 |
|||||||
Pressure of compressed air, MPa |
0,6 |
0,6 |
|||||||
Network tension, In |
380 |
380 |
|||||||
Level of loading, mm |
900 |
900 |
|||||||
Rated capacity, kW |
8,8 |
16 |
|||||||
Overall dimensions, mm: - - - length - - - width - - - height |
1900 1650 1600 |
1760 1650 1600 |
|||||||
Weight, kg |
1400 |
1500 |
-
-
Technical characteristics: | |||||||||
Characteristic |
WoodTec 4-200 |
WoodTec 4-250 |
|||||||
The sizes of the processed bars of rectangular section, mm: - - - thickness, the greatest - - - the smallest - - - width, the greatest - - - the smallest |
200 60 250 110 |
250 60 250 110 |
|||||||
The size of the processed bars of square section, mm: - - - the greatest - - - the smallest |
200 x 200 110 x 110 |
250 x 250 110 x 110 |
|||||||
Quantity of vertical milling heads, piece. |
2 |
2 |
|||||||
Quantity of horizontal milling heads, piece. |
2 |
2 |
|||||||
Power of the drive of each milling head, kW |
4 |
4 |
|||||||
Frequency of rotation of mills, rpm |
4130 |
4130 |
|||||||
Pressure of compressed air, MPa |
0,6 |
0,6 |
|||||||
Network tension, In |
380 |
380 |
|||||||
Level of loading, mm |
900 |
900 |
|||||||
Rated capacity, kW |
8,8 |
16 |
|||||||
Overall dimensions, mm: - - - length - - - width - - - height |
1900 1650 1600 |
1760 1650 1600 |
|||||||
Weight, kg |
1400 |
1500 |
-
-
-
-