Technical characteristics
- MaterialWood
- Partition typeStationary
Description
Sizes
The nominal sizes of plates and their deviation have to correspond specified in the table
Parameter |
Value, mm |
Maximum deviation, mm |
Thickness |
From 3 and more with gradation 1 |
±0,3 * (for polished plates) −0,3/+1,7 (for not polished plates) |
Length |
1830, |
± 5,0 |
Width |
1220, 1250, 1500, 1750, 1800, 1830, 2070, 2135, 2440, 2500 |
± 5,0 |
- * As within one plate, so in party of plates.
Notes:
- In coordination of the manufacturer with the consumer it is allowed to let out plates of the formats which are not established in the present table.
Application
Are applied to production of cabinet, upholstered and other furniture , construction elements, cars and in production of a container.
Plates can be revetted with an interline interval , paper , polymeric films, plastic.
Classification
- Design: by quantity of layers of DSTP it is subdivided on 1-layer, 3-layer and multilayered.
- Brand: depending on durability indicators on a bend, deformation, water resistance, susceptibility to a buckling and deformation of DSTP is divided into 2 brands: P-and and P-B.
- Grade: depending on criteria of appearance of a plate (cracks, chips, coloring, spots, ledges and deepenings) of a plate of DSTP are divided into 1 grade (defects are not acceptable except minimum), the 2nd grade (serious defects of a surface are admissible) and without grade (cardinal defects of a surface, it is used in construction).
- External layer: plates with a fine-grain surface (facing by polymeric materials is possible), usual (facing is applied by an interline interval) and coarse-grained are allocated (it is used in construction).
- Level of processing of a surface: polished and not polished DSTP is allocated.
- Class of emission of formaldehyde: according to contents in 100 g of a dry plate of DSTP of free formaldehyde the classes E1 (less than 10 mg), E2 (from 10 to 30 mg) are allocated.
- Water resistance: except that the plate of the P-and brand possesses the best waterproof properties (22% of deformation against 33% at P-B at immersion in water for days), the separate type of the waterproof DSTP intended for production of furniture and specific construction works is allocated.
- Fire resistance: at introduction to structure of DSTP of fire-retarding agents the plate acquires fire-resistant characteristics. Now in the territory of the Russian Federation production of this type of DSTP is not conducted.
- Density: on density of DSTP is divided into a plate of small density (less than 550 kg/m ³), average (550 — 750 kg/m ³) and high (more than 750 kg/m ³).
- On a way of pressing: flat or extrusive pressing
Contact the seller
Chipboard