Completely automatic etiketirovshchik with weighing of ES 7001 Label from above a series 7000

You can buy Completely automatic etiketirovshchik with weighing of ES 7001 Label from above a series 7000 here!

Description:

Industrial scales and an etiketirovshchik of Espera ES7000 — automatic weighing in the dynamic mode and drawing a label — to 120 packings a minute with the highest accuracy. ES7000 is intended for the large industrial enterprises and is ideal for synchronization with the packing line. The car of a mnogofunktsionaln thanks to the thought - over design: existence of a fillet on the conveyor for round products, automatically adjustable directing alignments of packings, automatic setting up the provision of the printer proceeding from the amount of packing and the place of drawing a label, the highest accuracy of drawing a label, the mobile conveyor for long products, careful drawing a label thanks to the label clip force monitoring system to a product, turn of a label thanks to stamp system of drawing labels, the convenient and functional interface for processing of a large number of information. Containers under a zapayka move automatically.

Equipment components

Terminal computer, ESC 954

The main frame of ESG 2154 with the bridge for the ESA 2304 printer, system of transportation of ESF 724

Consists of the giving and weighing conveyor 500 mm long and 360 mm wide, and also the labeling conveyor 900 mm long and 360 mm wide.

As the option can be put the additional giving conveyor ESF 124 which together with the ordinary giving conveyor provides division of the packings which are too closely to each other.

The car represents a strong design from high - quality stainless steel. All conveyors are equipped with the lever mechanism, the trigger mechanism, the mechanism of a tension of a belt and the built - in device of installation and dismantle of conveyors without use of tools. Established on 6 support, the system conforms to hygienic standards and is easy in cleaning.

Servomechanism for control of guides according to your requirements and type of packing for an etiketirovka. The useful surface of the conveyor is reduced to 280 mm at the expense of guides.

Throughout all process of transportation each packing is controlled by means of light barriers. Each conveyor has a fillet for work with round products.

The printer installed on Bridge ESA 2304 automatically is adjusted by means of the drive, and the etiketirovka position with an accuracy of millimeter is entered into the program of packing.

ESW 2704 scales

Weighing range: 8 kg
Min. weight: 20 gr

Discretization:

• 3 kg – 1 gr
• 6 kg – 2 gr
• 8 kg – 5 gr

The weighing conveyor: D X Sh = 500 x 360 mm

Range of the amount of packing D x Sh x In = 400 x 370 x 200 mm

Etiketirovka of long packings to 700 mm due to decrease in height of the conveyor by means of the lever with the automatic program of switching start/stop in the mode of long packing.

ESD 504 thermal printer

The high - performance printer can work with rolls of labels with an external diameter of 285 mm and with an internal diameter of 76 mm at the expense of what the installation time is reduced to a minimum.

Replacement of rolls of labels becomes simpler at the expense of the servomechanism opening the device. In several seconds after placement of a new roll the printing head is automatically closed, and the roll is fixed in the correct position.

The head for the thermopress 80 mm wide has permission of 8 points/mm (200 dpi). As an option it is possible to get a head for the thermopress 104 mm wide and with a resolution of 12 points/mm (300 dpi). The head type for the thermopress will be defined automatically. However quality of the press can change slightly according to permission option.

Speed of the press of 300 mm/sec. , completely automatic optimization according to pressing of a printing head and its raising over a label leads to minimization of mechanical and thermal losses.

Label sizes

Minimum: 37 x 37 mm.
Maximum without turn of a label: 200 x 110 mm (110 * 110mm with turn).
Turn of a label from 0 to 3590.
The compressor – is not required.
The labeling mechanism does not demand adjustment on height.

Width of the press depends on the used printing head (80 mm or 104 mm). Printing heads can easily be replaced with the user and do not demand control.

There are all most popular types of fonts.

Applicator, ESS 124

The applicator places the printed label in the chosen position. By means of the built - in vacuum pump (compressed air is not necessary) the label keeps on the stamping tool and goes to a packing surface. Automatic control under the different height of packings (0 – 200 mm). The exact etiketirovka is guaranteed. The touch technology gives the chance to place a label with different pressure.

The direction of labels and their position on length and width of packing are established in the program, and the printer always finds the correct position.

Labels can be turned on 90 °, 180 °, and 270 ° by means of the program.

Productivity of system

Depending on length and the weight of each packing, length and design of labels, and also external factors, productivity makes till 120 pieces/min. provided that the speed of giving is well adjusted and constant also without the press of the general label.

• Power supply: 190 – 240B/50 – 60 Hz.
• Total length 3rd conveyor system with the screwed together roller about 2060 mm.
• Adjustment of height: from 840 mm to 1020 mm.