- BrandSKAVER
- Country of manufactureKazakhstan
Thermal insulation and protection of your house.
We suggest to warm your House the dry plaster mix "SKAVER"
Advantages of the mix "SKAVER" before other smesyami:\
Drawing cement vermikulitovogo solution on brick walls allows to receive economy of a brick at a rate of 0, and imenno25kub. Therefore, the m on one CBM of a laying, at the same time coefficient of a sound absorption of vermikulitovy plasters makes 0,15-03, and the private of sandy plaster it is equal to 0,15-0,02
It is completely ready to application and it is shut only by water before drawing, facilitates a design, lightness, low heat conductivity, high sound insulation, fire resistance, anti-condensation, properties, high porosity gives the chance to the room "to breathe", good sticking to a surface (adhesion), frost resistance, durability.
The reached effect at works:
Decrease in losses of heat in environment, simplicity and convenience of application, reduction of labor input of construction works, the improved stickiness with various materials, the increased resilience to a treshchinoobrazovaniye, the simplified processing of designs of difficult profiles, ecological purity, reduction of thickness of walls, increase of fire resistance of building constructions.
The main properties on which it is used in construction are:
· Very Low heat conductivity (0,04 - 0,062 W/sq.m)
· Fire resistance till 1300 °
· Environmental friendliness
· Durability
· Ease
· It does not slezhivatsya
· Does not decay and is not pleasant to rodents
· Comparison of vspuchenny vermiculite with other construction materials on heat conductivity:
Comparative characteristics: | ||||
Name of material | Brick tab | Expanded clay | Penoplekst (PSB-S) | Vermiculite |
Heat conductivity coefficient | 0,47 | 0,14 | 0,038 | 0,042 |
Sound absorption coefficient | 0,049 | 0,5 | 0,5 | 0,8 |
(thickness of material of 50 mm) | ||||
Vapor permeability | 0,14 | 0,23 | 0,05 | 0,3 |
Fire resistance | NG | NG | G-1 | NG |
melting temperature | 1200C | 1150C | 240C | 1320C |
Durability (years) | It is unlimited | 35 | 15 | It is unlimited |
Material | Heat conductivity (W/sq.m) |
Vspuchenny vermiculite | 0,04 - 0,062 |
Gravel ceramsite | 0,12 |
Foam concrete | 0,14 - 0,18 |
Concrete | 1,45 |
Reinforced concrete | 1,6 |
When using as a heater of polyfoam, expanded polystyrene, mineral wool you undoubtedly save on material cost, BUT further to have to process all these materials (to plaster, facing by porcelain tile, facing by gypsum cardboard) that leads to increase in cost of sq.m of thermal insulation. It is also necessary to mean that inexpensive heat-insulating materials possess several critical minuses: products from polyfoam or expanded polystyrene — at influence of high temperatures emit toxic gas. Mineral wool to melt. Whether you are ready "to save" on the safety and safety of your relatives?
If you responsibly approach a problem of warming of your House apply qualitative, environmentally friendly materials which will keep heat in the House for many years.