Technical characteristics
- Country of manufactureRussia
Description
It is applied to alignment of the grounded and not grounded metal and nonmetallic surfaces, and also applied as a primer under epoxy materials. It is applied to systems of the coverings operated in atmospheric conditions and in rooms.
Technical characteristics
Normative document | GOST 28379 - 89 |
Color of a film | red - brown |
Appearance of a film | the surface of filling has to be equal, uniform, without bubbles, cracks, grains |
Mass fraction of nonvolatile substances, % , not less | 90 |
Conditional viscosity at a temperature (20, 0 ± 0, 5) °C on the VZ - 246 viscometer, with, not less | 30 - 45 |
Drying time to degree 3 at a temperature (20 ― 22) °C, h, no more | 24 |
Drying time to degree 3 at a temperature (65 - 70) °C, h, no more | 7 |
Film durability at blow to the U - 1 device, cm, not less | 40 |
Elasticity of a film at a mm bend, no more | 50 |
Ability to be ground | it is ground by a waterproof grinding skin No. 4 - 6 with water |
Instructions to application
Drawing method | kraskoraspylitel |
Thinner | R - 4, R - 5, R - 5A solvents |
Temperature conditions of drawing | from 5 to 35 ˚C |
Interlaminar drying (at T =20±5˚C, φ=75% ) | no more than 24 hours |
Theoretical expense on a single - layer covering | 130 ― 300g/sq. m |
Thickness of a single - layer covering | 60 ― 150 microns |
Quantity of layers | 2 - 3 |
Recommendations about airless dispersion: | |
pressure of a raspyl | 180 ― 200 atm |
diameter of a nozzle | 0, 015 ― 0, 017dyuyma |
The recommended schemes of drawing
Preparation of a surface before coloring: Metal: abrazivostruyny cleaning to degree Sa2 1/2 or mechanical cleaning to St3 degree on IS ISO 8501 - 1. To degrease a surface.
to store in densely closed container, protecting from moisture, heat and direct sunshine.
Warranty period of storage: 12 months from the date of production
Similar company products
Contact the seller
EP-0010 filling red-brown