Currency KZT
EK 330 caterpillar excavator (32 t, 1,5 m ³) buy in Almaty
Buy EK 330 caterpillar excavator (32 t, 1,5 m ³)
EK 330 caterpillar excavator (32 t, 1,5 m ³)

EK 330 caterpillar excavator (32 t, 1,5 m ³)

Products from producer
In stock
Price:
1.01 KZT
Shipping:
Seller
Kazakhstan, Almaty
(View map)
Technical characteristics
  • BrandКранэкс
  • Country of manufactureRussia
  • Principle of operationContinuous action (trench, rotary)
  • ProfileHeavy
Description
Direct deliveries to Kazakhstan of caterpillar excavators from plant of the producer. To buy special equipment you call: ☎ +7(701)475-44-86 or write ✍ to us ✉: kraneks_almaty@mail.ru. Consultation, departure for personal meeting and test drive is guaranteed.

EK 330 was developed on the basis of the EK 300 excavator and became result of modernization of this model.

The new model is equipped with high-quality import accessories of firms "Bosch Rexroth", "Deutz" (Germany), "Hydrauto" (Sweden) and in the technical and operational parameters completely corresponds to the best import analogs.

EK 330 can be effectively used on different types of earthwork, open-cast mountain minings, meliorative works, at destruction of reinforced concrete designs. Small overall dimensions allow to use this model of the excavator for work in city conditions.

Overall dimensions
Height in situation for transportation, mm 3 415
Length in situation for transportation, mm 11 140
Width of a caterpillar tape, mm 600; 700; 800
Width of a caterpillar drive, mm 3 190; 3 290; 3 390
Length of a caterpillar drive, mm 4 620
Base, mm 3 700
Clearance, mm 500
Track, mm 2 590
Radius of tail part of a rotary platform, mm 3 405
Height to a roof of a cabin, mm 3 130
Height to a rotary platform, mm 1 240

CABIN

The strong and spacious cabin of the EK 330 excavator has all necessary in order that work of the operator was the most productive and comfortable:

  • the Simrit hydrosupport (Germany) reducing vibration;
  • the rubber consolidations on doors and hatches providing shumo-and thermal insulation;
  • chair "Grammer" (Germany) with an ergonomic profile and wide range of adjustments;
  • conveniently located governing bodies "Bosch Rexroth" (Germany) with low effort on levers and pedals;
  • the heater "Webasto" (Germany) creating additional comfort;
  • the good review which is provided with big windows of a cabin which glasses are executed flat for fast replacement in case of their damage;
  • at the request of the customer in a cabin the stereoradio tape recorder with the speaker system which is pleasant addition for operators and the Webasto conditioner (Germany) providing comfort during the work in hot climate is installed.

MANAGEMENT

The new, meeting the most modern requirements of design and ergonomics, multipurpose control panel of the EK 330 excavator carries out prestarting and current diagnostics of systems of the excavator, informs the operator on emergence of malfunctions, excess of maximum-permissible operational parameters and provides a possibility of the flexible choice of operating modes and management of a hydraulic system and the engine.

The LED display of the panel including four indexes and four signaling devices allows to control completely temperature and pressure in the engine, temperature of the worker and cooling liquids, the fuel level, and also their maximum permissible parameters.

The multipurpose STOP indicator informs the operator on emergence of emergencies, highlights information in the form of a code on malfunction of knots of the excavator during prestarting diagnostics.

Use of dustproof pseudo-touch switches of the choice of the modes, the LED display and indicators, existence of a scale of control of turns of the engine and LED illumination (color of a luminescence - white) does the new panel not only more informative, but also allows to increase a resource of its work considerably.

The system of automatic change of brightness of a luminescence of indicators and illumination depending on external illumination and an antiglare surface of the front panel ensure the most comfortable functioning of the operator at any time.

Active protection against excess of maximum-permissible operational parameters, the STOP indicator and buzzer considerably simplify control of work of systems of the excavator and allow the operator to concentrate completely the attention on performance of working operations that promotes labor productivity increase.

ENGINE

On EK 240 6 cylinder diesel Deutz engine (Germany) with a turbo-supercharging and cooling of nadduvochny air which is characterized by high reliability, profitability and small need for maintenance are installed. The diesel Deutz develops the power of 250 h.p. (183 kW), conforms to requirements of the EURO standard 3 and provides to the excavator the high power, productivity and durability under any service conditions.

The dual axial and piston pump fastens directly to an engine flywheel. The torque from the engine to the pump is transferred by means of the reliable, not demanding leaving and adjustments, the CENTA coupling (Germany).

On the EK 330 excavator there is a system of the choice of control modes by the engine. At the mode of "Avtogaz" turns of the engine keep at the set level irrespective of loadings no more than 10 with if the condition of lack of loading or small loading lasts more than 10 with, the system automatically reduces turns to originally set level that allows to reach the maximum economy of fuel. At the Avtodiesel mode turns of the engine are supported at the set level constantly irrespective of loadings and do not decrease in the course of work. This mode is used if the entire period of work full capacity of the engine is necessary for the operator

The multistage system of purification of fuel of pollution and water guarantees long no-failure operation of the fuel pump of a high pressure and nozzles.

HYDRAULIC SYSTEM

The hydraulic system provides to the EK 330 excavator rational consumption of power, smoothness, accuracy and speed during the work depending on service conditions and nature of the carried-out operations.

The hydraulic system is convenient in operation, is universal (meets the requirements of any additional equipment), develops working pressure of 37,5 MPas, allows to reach the maximum productivity at decrease in unproductive losses.

All excavators are equipped with a complete set of the import hydroequipment: the modular pump, the hydrodistributor, hydromotors of the course and turn, control units "Bosch Rexroth" (Germany), hydraulic cylinders "Hydrauto" (Sweden) with dampers, the central collector "Haldex" (Germany), RVD "Manuli" (Italy), press butterdishes "Wurth" (Germany), a filter element of working liquid "Hydac Filtertechnic" or "Internormen" (Germany).

On EK 330 there is a system of the choice of operating modes (only six modes) intended for reduction of frequency of rotation of the engine and the pump, and also pressure in a hydraulic system in compliance with nature of the performed work. Existence of this system provides coordination of characteristics of the equipment with a concrete type of works, and, as a result, flexibility of the car in operation. The mode of a hydraulic system Power Boost allows quickly (for 8 seconds) to increase (for 10%) the maximum effort created by the working equipment if it is demanded by this type of works.

METALWORK

Modern technologies of the automated design, qualitative materials, the equipment of the known global manufacturers, rigid quality control at all stages of technological process guarantee stable quality, high precision and reliability of a metal construction of the EK 330 excavator.

All elements of a metalwork are made only of the low-alloyed steel that provides their increased durability and durability. The constructive elements experiencing the raised strain in the course of work are made of high-strength steel 10 HSND. For production of ladles Hardox steel (Sweden) having the increased durability and wear resistance is used.

Welding of a metalwork is made by materials of Esab firm (Sweden), on automatic welding semiautomatic devices of Kemppi firm (Finland), in the environment of protective gases - argon and carbonic acid. The progressive technology of welding and the modern equipment provides high strength characteristics of welded seams and, as a result, high and stable quality of a metalwork.

Butt welding of pipelines is made on the programmable Esab installation that provides their increased reliability and durability. Ultrasonic control of welded seams excludes existence of internal defects.

CATERPILLAR DRIVE

The caterpillar drive of EK 330 with elements of production of Berco firm (Italy) is characterized by high reliability and durability and ensures effective functioning of the excavator on any kinds of soil.

X the-shaped design of a caterpillar frame guarantees the high resistance to a bend and twisting. The duo-pitch surface of caterpillar beams gives them additional durability and prevents soil sticking. The directing protections on caterpillar beams prevent a descent of basic skating rinks from caterpillar tapes.

Course hydromotors "ΚΥΒ" (Japan) and reducers of the course "Trasmital Bonfiglioli" (Italy) provide the increased reliability of the excavator at movement, and also necessary traction effort when overcoming rises and when performing turns.

The basic and supporting skating rinks of "Berco" are capable to maintain intensive loadings and are intended for the long period of operation. Special rubber-metal consolidations provide tightness of skating rinks, protect their rubbing surfaces from dust and dirt.

The mechanism of a tension "Berco" ensures reliable functioning of the excavator throughout all service life.

Tracks of "Berco" have high durability, provide reliable coupling with soil and reliable operation of the excavator on any kinds of soil.

WORKING EQUIPMENT

Arrows and handles represent the welded designs of box-shaped section having special stiffening ribs (internal partitions) in the places experiencing the greatest strain. They are calculated on effective and no-failure operation of the EK 330 excavator even in the most severe conditions of operation. Ladles are made of high-strength and wearproof Hardox steel - 400 (Sweden) and equipped with teeths of Metallurgica Valchiese firm (Italy).

The wide list of the additional equipment (ladles of various form and capacity, hydrohammer, the ripper, the shnekovy drill, the grab) provide universality and high efficiency of EK 330.

Contact the seller
EK 330 caterpillar excavator (32 t, 1,5 m ³)
EK 330 caterpillar excavator (32 t, 1,5 m ³)
Shipping method
Compare0
ClearSelected items: 0