Insulating material on a kremniyorganichesky basis of Izollat-04

Izollat-04

Description

Heat-insulating paint of white color.

Packing (buckets): 5 / 10 / 19 liters

Appointment

Insulating material on a kremniyorganichesky basis of Izollat-04, is intended for isolation of high-temperature surfaces.

Izollat-04 it can freely be operated at a temperature from +5 to +500ºС.

Objects of application

· thermal insulation of steam lines;

· thermal insulation of chimneys;

· thermal insulation of gas flues;

· thermal insulation of the industrial equipment.

Preparation liquidly - a ceramic covering of Izollat-04 to application:

· before each use or after interruption of works, the covering needs to be mixed carefully (hashing of a covering should be made before receiving the homogeneous mass, on a consistence reminding sour cream. In avoidance destruction of hollow ceramic balls, speed of hashing should not exceed 150 revolutions per minute);

· dilution of Izollata-04 is not recommended.

Preparation of surfaces for drawing a covering Izollat:

Before drawing a covering of Izollat-04 the surface has to be cleared of all possible pollution and old coverings. Then it is subjected to processing by the degreasing means.

Recommendations about drawing Izollat-04

· The first coat layer of "Izollat-04" is put 0,3-0,5 mm thick then the surface is wound with the reinforcing fibreglass mesh with cells of 2*2 or 4*4 mm. Time of drying makes 24 hours at a temperature not lower than + 8 C.

· The subsequent layers are put by the similar principle to a set of the required total thickness of a covering.

After work of a brush, carefully to wash out airbrushes water.

ATTENTION: to more effective thermal insulation of Izollat-04 it is applied together with IPS-T-1000 fiberglass.

During the work with "Izollat-04" it is necessary to use:

· ZM 7500 respirator;

· chemical goggles;

· chemical gloves and protective clothes.

Technical characteristics "Izollat"