Currency KZT
Parquet on spring logs buy in Almaty
Buy Parquet on spring logs
Parquet on spring logs

Parquet on spring logs

In stock
Price from:
22000 KZT
Shipping:
Seller
Kazakhstan, Almaty
(View map)
Technical characteristics
  • BrandАрсенал Строй ЛТД
  • Country of manufactureKazakhstan
Description
Sports parquet on spring logs:

The sports parquet is made with use of experience in area of production of a parquet board.

The parquet consists only of "live", dense wood that, besides rational use of material, promotes as well to stability of production.

The professional sports parquet represents original "floating"

system - consisting of a parquet board, a log and shock-absorbers. Parquet board

has the reliable design maintaining high loadings, boards are docked among themselves on the thorn groove system that is an indispensable condition for sports floors. The top layer of a board is carried out from an oak.

Dynamism of drawing, the selections of classic which are sharply changing tone allow to create fine

sports mood. 3 layers of a high-quality varnish for a sports parquet are applied on carefully prepared finishing surface of wood that provides necessary sports characteristics and durability of use.

The sports parquet is used for laying in universal halls for basketball, volleyball, handball, mini-soccer halls for fitness class, halls for dances.

The design of a parquet provides technological and fast laying with the minimum quantity of waste. When laying system it is necessary to observe technology of the device of parquet floors.

Keeps within on the concrete basis or a cement and sand coupler (requirements see below).

Design of system of a sports parquet:

- parquet board (massif) of-15,0 mm

- oak

- a varnish for a sports parquet - 3 layers

- multilayered plywood - 10mm-12mm

- wooden a log - 12 mm

- waterproofing film

- the rezino-rubber shock-absorber - 6mm-8 mm

Design height - 45,0 mm

Requirements to the basis

1. The device of the basis is conducted according to requirements Construction Norms and Regulations.

2. Durability of the used materials on compression has to be not lower than 20 MPas.

3. Existence of a waterproofing.

4. Weight humidity of the basis has to be no more than 4%.

5. The surface should not have the reasons cracks, hollows, ledges, flows, ledges, emptiness and peelings. Existence of spots of fuels and lubricants, oils, fats is not allowed.

6. The surface of the basis has to be ground.

7. Flatness of a surface of the basis is controlled by the two-meter lath laid on the basis in any place and the direction, the gleam should not exceed 2 mm.

8. At discrepancy of flatness of a surface of item 5 and item 7 the device leveling is necessary

(leveling) coupler.

9. The surface of the basis has to be cleared of foreign objects, garbage and dust.

10. Basis adjunctions to walls have to be rectilinear. Walls in an adjunction to a coupler have to be prepared (are plastered and puttied) under installation of a plinth.

Requirements to ventilating system

1. Air temperature in the main mode indoors - 18-26C, in the short-term mode

operation till 5 o'clock - 8÷10C. Humidity of air - 40÷60 of %. The set parameters have to

to be supported round the clock and all the year round during works and during operation.

Contact the seller
Parquet on spring logs
Parquet on spring logs
Shipping method
Compare0
ClearSelected items: 0