Currency KZT
Pitch for repair of cracks of EPOJET buy in Almaty
Buy Pitch for repair of cracks of EPOJET
Pitch for repair of cracks of EPOJET

Pitch for repair of cracks of EPOJET

Code: 60
In stock
Price:
40000 KZT
Wholesale:
  • 39800 KZT/pcs  - from 10 pcs
Shipping:
Seller
Kazakhstan, Almaty
(View map)
Technical characteristics
  • BrandMapei
  • Country of manufactureItaly
  • ColorTransparent
Description

Superfluid epoxy for injections.

Scope.

- Monolithic repair of the constructions having the cracks or gaps caused by heavy loadings, casual blows or earthquakes.

- Strengthening and strengthening of designs injections under low pressure.

Some examples of application.

- construction repair of beams, support and cracks in floors injections under low pressure;

- strengthening of beams and floors injections, and also by a concrete cladding method i. e. when the pasted plates are mounted by lateral valves that makes impossible direct putting ADESILEX PG1 or ADESILEX PG2 glue;

- repair and a waterproofing of cracks in tanks, capacities and channels;

- repair by injections, elements of facades or architectural details which need to be pasted in addition.

- protective injections of post - compression kabeleprovod;

- structural strengthening and repair of the civil and industrial road constructions having cracks;

- sealing of cracks in cement couplers;

- strengthening and repair injections of the concrete constructions damaged by earthquakes, draft or in blows.

Technical characteristics.

EPOJET represents the two - component epoxy glue which is not containing solvents. Parts of structure (A component A - pitch, a component B - a hardener) are delivered in certain proportions and mix up just before application.

After hashing of EPOJET becomes liquid with the low level of viscosity which provides a possibility of application for injections.

EPOJET possesses the excellent isolating properties and mechanical durability, moreover, the structure perfectly grapples with concrete and steel structures.

Recommendations.

- Do not apply EPOJET at a temperature below + 5 °C.

- You do not apply EPOJET on damp surfaces.

- You do not apply EPOJET on the dusty, fragile or weak bases. - do not use EPOJET for sealing of compensation seams.

Instruction for application.

Preparation of the basis.

Before an injection of EPOJET be convinced that a concrete surface absolutely pure and strong. Clear the exfoliating and loose particles, dust, cement milk and paint by means of a brush or a skin. The concrete elements impregnated with oil or fat need to be removed completely.

Laying and injection of steel fittings.

Clear traces of a rust or fat to gloss of metal by means of sandblasting or if it is necessary, clear a surface an emery paper and degrease solvents.

After completion of preparatory procedures carefully fix steel plates on concrete by means of expansion bolts, then make sealing of injectors by the gluing structures of ADESILEX PG1 or ADESILEX PG2.

Sealing of cracks injections.

Do a number of openings, with a diameter of 8 - 9 mm along an edge of a gap and arrange injectors so that cracks were blocked. Blow cavities compressed air for removal of the dust formed after drilling. Insert suitable injector tubes into openings and record them ADESILEX PG1 or ADESILEX PG2 glues.

If openings cannot be made because of a lack of the place, fix a flat head of an injector tube directly on concrete by means of expansion bolts and paste it ADESILEX PG1 or ADESILEX PG2 glues.

Wait ADESILEX PG1 so far or ADESILEX PG2 will harden (not less than 12 h), then clear injector system a purge compressed air.

Preparation of structure.

First of all, it is necessary to mix components of structure EPOJET. Add the Component A to the Component B and mix them manually by means of the pallet (for small amounts) or a low - speed powerful drill (for large numbers), avoiding formation of air bubbles, before receiving uniform mix. It is necessary to mix components in the necessary proportion since the wrong ratio can lead to incomplete hardening of EPOJET. If partial use of packing is required, measure proportions by means of exact electronic scales.

Drawing structure.

At once after hashing, begin an injection: you enter EPOJET, since the lowermost tube until the structure begins to follow from the following tube. Close the lower tube and continue an injection until all crack is not filled.

Horizontal cracks can be pressurized by filling of EPOJET directly in a crack.

At a temperature of + 23 °C of EPOJET it is necessary to use within 40 min.

Avoid application of EPOJET at a street temperature below + 5 °C.

Precautionary measures in time and after preparation and drawing.

EPOJET can cause irritation of skin. It is recommended to use protective gloves and points in a preparation time and drawings structure. At application of a product in the closed or badly ventilated rooms, it is necessary to provide compulsory delivery ventilation.

In case of hit in eyes carefully wash out water and see a doctor.

Security guidelines at preparation and application.

The component A causes irritation of eyes and skin. The component B contains very caustic and harmful substances. At long contact there can be allergic reactions. Avoid any contacts with skin and eyes. At hit on skin wash out water with soap and see a doctor. At emergence of any allergic reactions - consult at the doctor. At hit in eyes wash out flowing water and see a doctor. Apply a product in the ventilated rooms. EPOJET constitutes danger to water organisms, emission of a product in environment is forbidden.

Cleaning.

The tools used at preparation and drawing have to be cleared at once after use by means of solvents (ethyl alcohol, toluene etc. ).

Expense.

Sealing of cracks:

1,1 kg/dm3 of emptiness

Gluing of elements of combined concrete to a coupler.

1,1 kg/sq. m at a thickness of glue layer of 1 mm.

Packing.

Set:

- 2,5 kg (2 kg - buckets, 0,5 kg - bottles)

Characteristics
Main attributes
Producer Mapei
Country producer Italy
Contact the seller
Pitch for repair of cracks of EPOJET
Pitch for repair of cracks of EPOJET
Shipping method
Compare0
ClearSelected items: 0