U1213A - Pincers current-measuring
- Customer pickup,
- Courier
- In detail
- ManufacturerAgilent Technologies / Keysight Technologies
- BrandAgilent Technologies / Keysight Technologies
- Country of manufactureMalaysia
Key opportunities and technical characteristics
Safe measurement of big currents
- Measurement of a direct current, true mean square value of alternating current and the sum of a variable and constant component (AC+DC) to 1000 A
- The compact sizes of the case, having revealed ticks to 52 mm
- Possibility of management of one hand
- Possibility of fixing of peak values in the mode of measurement of starting currents
- The big two-lower case display with illumination
- Measurement of capacity and temperature
- Manual or automatic choice of ranges of measurement
- Protection against an overstrain of KAT III of 1000 V and KAT IV of 600 V
Measurement of current in electric distributive cables can be rather complex and unsafe challenge. Manual current-measuring pincers of Keysight of the U1210 series allow to measure great values of current in cables with a diameter up to 52 mm without rupture of a chain. Unlike the majority of other current-measuring pincers, these devices are equipped also with the functions of a digital multimeter providing measurement of resistance, capacity, frequency and temperature that significantly simplifies detection of malfunctions in the course of installation and service of the equipment. And the most important — they provide the highest level of protection, meeting standards of KAT III of 1000 V and KAT IV of 600 V. Ispolzuya current-measuring pincers of Keysight of the U1210 series, you receive universality of application, convenience and safety at measurement of big currents.
Technical characteristics:
Alternating voltage | Range | 4B/40B/400 IN / 1000 IN |
Permission | 0,001B/0,01B/0,1B/1B | |
Measurement error |
45-400gts: 1,0%+5ed. accounts 400gts-2kgts: 2,0%+5ed. accounts |
|
Entrance resistance, capacity | 1 megohms, 100pf | |
Indication of an overload | 1000 V | |
Measurement cf. quarter of values (RMS) | + | |
Constant tension | Range | 4B/40B/400 IN / 1000 IN |
Permission | 0,001B/0,01B/0,1B/1B | |
Measurement error | 0,2%+5ed. accounts | |
Entrance resistance, capacity | 10 megohms | |
Indication of an overload | 1000 V of RMS | |
Alternating current | Range | 40 AND / 400A/1000A |
Permission | 0,01A/0,1A/1A | |
Measurement error |
45-65 Hz: 2,0%+10ed.scheta/2,0%+5ed.scheta/ 2,0%+5ed.scheta 65gts-1kgts: 3,0%+10ed.sch/3,0%+5ed.scheta/ 3,0%+5ed.scheta |
|
Measurement cf. quarter of values (RMS) |
+ |
|
Direct current | Range | 40 AND / 400A/1000A |
Permission | 0,01A/0,1A/1A | |
Measurement error | 1,5%+15ed.scheta/1,5%+3ed.scheta/2%+5ed.scheta | |
Measurement of resistance | Range | 400om/4kom/40kom/400kom/4mom/40mom |
Permission | 0,1 Ohm / 0,001kom/0,01kom/0,1kom/0,001M | |
Measurement error | 0,3%+3 units sch. | |
Test current | 0,8ma/80mka/8mka/727na/112na/112na | |
Measurement of temperature | Thermocouple type | To |
Range | - 200 WITH...-40 WITH/-40 WITH... +1372 WITH | |
Permission | 0,1 hail With | |
Error | 1%+3 hail With / 1%+1 hail With | |
Measurement of frequency | Range | 99,99gts/999,9gts/9,999kgts/99,99kgts/999,9kgts |
Permission | 0,01gts/0,1gts, / 0,001kgts/0,01kgts/0,01kgts | |
Error | 0,2%+3 units sch. | |
Minimum frequency | 10 Hz | |
Diode test | Permission | 0,001B |
Measurement error | 0,5%+2 units sch. | |
Test current | 0,8ma | |
Opening tension | <<span lang="ru">+3,1 B | |
Measurement of capacity | Range | 4mkf/40mkf/400mkf/4000 mkf |
Permission | 0,001mkf/0,01mkf/0,1 mkf / 1 mkf | |
Measurement error | 1%+4 units sch. / 2%+4 units sch | |
Indication of an overload | 1000 V of RMS for current <<span lang="ru">0,3A | |
Most displayed number | 4000 | |
Range of working temperatures, humidity | - 10 °C... +50 °C, 80% | |
Max. Diameter of a wire, mm | 52 | |
Supply voltage | 9 In (operating time - 60 h) | |
Size, mm | 106х260х43 | |
Weight, | 525 |