Evaporators are industrial

Advantages of the evaporator to the Thermofin thermal pump

1. It is made in Germany - high quality of production and assembly, excellent quality of materials.

2. Vertical installation of the block:
very small convection in comparison with horizontal blocks (especially big economy of energy - in the winter, at an ottayka);
inclined position of the fan, or, as an option - the isolated fan. At negative temperatures the fan does not freeze (long working capacity);
steam at an ottayka is not besieged on the fan, and gathers above, in free space;
the case with the inclined fan accumulates additional heat at an ottayka;
the sound goes down. Sound pressure is much less, than data in the catalog are provided (about 29 d(B) A at distance of 10 mm).

3. Advantages of system of tubes 50 x 50:
diameter of tubes is 16 mm (other producers have 10 mm).

Transfer is warm: the surface of tubes - air is much more effective, than a lamel - air. The specified area of the evaporator is reached not by the area of plates (lamels), but an external surface of tubes;
pressure drop of air via the block very small. The maximum speed of air in the block - air is longer in a package - there is no turbulence and badly blown places. Uniform distribution of air.

4. Stable design.

5. Modern design.

6. Lamel thickness 0,35lm (at other 0,12 mm) and tubes of 0,40 mm - guarantee even under adverse conditions long working capacity (presumable operability of 30-40 years).

7. Distance between lamels of 7 mm: rare thawing of system - huge economy of energy.

8. A free drain of water from the evaporator: lack of a bathtub - the block is completely open from below.

9. Special calculation and selection of the distributor is reached only by practical consideration and perfectly works in the winter and in the summer.