Sink for a bathroom of CR 3031, 400*450*450mm
Model: CR 3031
Material: Neolithic (acryle)
Sizes (D*V*Sh): 400*450*450mm
Color: Blue, violet, green, yellow, red
Specialcareinstructions – instructions for leaving (storage)
Never put and do not place heavy objects on a table-top and sinks
Avoid sliding of firm and heavy objects of a surface.
When you pour out the boiling water in a sink, at the same time start up cold water from the crane.
Technical leaving
Cleaning:
Soap and water will remove the majority of spots. For hard-to-remove spots use a sponge
Scratches:
To remove scratches use the following two step process, begin with use 240=gntmokroy an emery paper, then clear and polish by means of fabric and felt.
Physical characteristics Test Method Average Results
Force of tensile strength of ASTMD-638 5.500PSI
Coefficient of tensile strength of ASTMD-638 1.500.000PSI
Force on ASTMD-790 8.000PSI bend
ASTMD-790 1.200.000PSI bend coefficient
Limit of elasticity of ASTMD/636 0.4
(relative lengthening at a gap)
Degree of rigidity of ASTMD-785 95 ROCKWELLM
Hardness on Barkola ASTMD-2583 BARCOL63
Crash-worthiness of ANSIZ124.3 PASSES (passes)
Shock tests on Izoda ASTMD-256A 0.28ft-lbs/in
Temperature ASTMD-696 0.000018 in/inF expansion. 302.000 in/inC
High-temperature expansion
(500 F),(260 C) of NEWMA LD3-3.6 No Effect
Resistance in the boiling NEWMALD3-3.5 NoEffect water
Namokayemost (moisture absorption) (24 hours) of ASTMD-570 0.05%
Resistance to attrition of NEMALD3-3.1 NoEffect
Wear / the clearing ability of ANSIZ124.3 Passes (passes)
Corrosion firmness of ANSIZ124.3 Passes (passes)
Resistance to fungi of ASTMG-21 NoAttack it (is steady)
Specific weight 1,75
Resistance to ultra-violet radiation of NEWMALD3-3.1 Without changes (200 h)
ASTME-84 inflammability
Distribution of a flame <25
Smoking <30
Rating of the class Class 1