Vvodno distributing devices, Devices introduction and distributive, Almaty

Decided on purchase of the introduction distributing device, but there were many additional questions. Address for consultation us. Our experts will give irrefragable answers, will tell about the price and delivery time.

Appointment

Introduction distributing devices, establish in residential and public buildings, and also production rooms for the purpose of reception, distribution and the accounting of electric energy. In inhabited objects I LIE, are mounted on a vertical surface and intend for the accounting of energy of three-phase alternating current with tension of 380-220 volts and with a frequency of 50 hertz. I LIE, also well protects the line from overloads and short circuit. Introduction distributing devices, establish in the rooms equipped with an electric board. In spite of the fact that the device is made for unilateral service of residential and public buildings, installation is allowed I LIE on other objects with the same scheme of power supply.

Technical specification

- admissible working current no more than 630 And

- the admissible voltage of current is up to 380 V at 50 Hz

• the degree of protection provided with a cover at the closed door makes IP30, from a bottom - IP00 according to the interstate standard 14254-96.
• regarding requirements to electrotechnical products at influences of mechanical factors of external environment it is registered in Sq.m of group of service conditions on GOST17516.1-90
• it is intended for climatic areas with a temperate and frigid climate (UHL4 in accordance with GOST 15150-69)
• height above sea level has to make no more than 2000 m
• vertical provisions during the work, a deviation no more than 5 °.
• long operating mode
  

Introduction distributing devices of our execution, are completed with details of the famous European producers of General Electric, ETI, EATON, Shnider, Moeller. I LIE, consist of cases of floor execution. In the lower part of the device to the grounding tire the grounding contour fastens. All wires and a cable are entered from below, on each input their section has to make to 2kh95mm2 or 1kh240mm2. Under the individual order, perhaps to change: the admissible current of the device, an electric circuit completing devices, rated current of the departing lines and their number.